View Logged Information on the JNIOR

A lot of JNIOR applications log information about what they are doing. This information can be about different things. Sometimes the application is purposely creating log files to keep track of data such as water levels or I/O changes. Logs can also be used to keep track of information about the application itself and if its run into any errors. Here is a quick post on how to look at Logs on a JNIOR.

To access information on a Series 4 JNIOR, you’ll first need to open the JNIOR WebUI. Once the on the JNIOR WebUI, you’ll then access the folder tab. Here you can see a list of all the files located on the JNIOR. Navigating through the folder shows the different files you can view, including log files.

Folders tab of JNIOR Web Page

Another way to access files on either a Series 3 or 4 JNIOR, you can open the File Transfer Protocol from the Support Tool. To start you’ll open the Support Tool, then in the beacon tab you’ll right click on the JNIOR and select Tools/Open FTP. You’ll then see a dialog open asking for the JNIOR’s username and password. Once you enter that, you should see all the available files on the JNIOR, including log files.

NOTE: The address in file explorer will match your JNIOR’s IP Address
By | Updated On November 3, 2023 1:23 pm | No Comments | Categories: | Tags:

INTEG Process Group, inc. © 2023

Mon - Fri, 8am - 4pm EST
P: 724-933-9350
Always Available
Contact Form