Unfortunately, due to COVID-19, our business is temporarily closed. In the state of Pennsylvania, where we are physically located, we have all been ordered to stay home except to carry out life-sustaining activities. We are hard at work remotely but unfortunately unable to package shipments. We look forward to getting back to work to provide you with your automation needs. We hope everyone can stay safe and healthy during this difficult time.
You can still place orders to get them in the queue. We will ship as soon as we safely can. Thank you for your understanding and patience.
The 4 - 20 mA Analog Expansion Module adds 4 analog inputs and 2 analog outputs to the JNIOR. Just plug the expansion module into the JNIOR Sensor Port and reboot. The expansion module will automatically be addressed as inputs 1 - 4 (or 5 - 8 for the second module) and outputs 1 - 2 (or 3 - 4 for the second module).
The 10 VDC Analog Expansion Module adds 4 analog inputs (-10 to +10 VDC) and 2 analog outputs (0 to 10 VDC) to the JNIOR. Just plug the expansion module into the JNIOR Sensor Port and reboot. The expansion module will automatically be addressed as inputs 1 - 4 (or 5 - 8 for the second module) and outputs 1 - 2 (or 3 - 4 for the second module).
The Power 4 Relay Output Expansion Module adds 4 low/high voltage relays (handling up to 120/240 Volts AC @ 10 amps), form C relays (one normally open contact and one normally closed contact) to the JNIOR.
The 3 Channel LED Dimmer Expansion Module System adds 3 channels of PWM (Pulse Width Modulated) control that can regulate LED strip lights from 0 - 100%. Each channel can handle up to 10 amps. The module handles up to 30 amps in total. The expansion module plugs into the JNIOR Sensor Port. The expansion module will automatically be addressed as outputs 1 - 3 (or 4 - 6 for the second module and so on).
The JNIOR Control Panel works with all the JNIOR models and connects to the JNIOR Sensor Port to provide manual control of JNIOR macros via the switches and convey feedback through the LED status lights. The JNIOR Control Panel is integrated with the JNIOR via the Tasker and Cinema programs. All functionality is easily set-up utilizing the WebUI and the JNIOR Support Tool.