The longer DIN Rail Mount (catalog number DIN-300-001) connects to the back of the JNIOR to allow it to be easily connected to a standard DIN rail.

The shorter DIN Rail Mount (catalog number DIN-300-002) connects to the back of the Expansion Modules to allow them to be easily connected to a standard DIN rail.

The shorter DIN Rail Mount (catalog number DIN-300-003) connects to the back of the Power 4 Relay Output Expansion Modules to allow them to be easily connected to a standard DIN rail.

Replacement connectors for the INTEG JNIOR automation controller

The optional INTEG Power Supply converts 120/240 VAC to 12 VDC at 1 amp.

The optional INTEG Power Supply with a Euro plug converts 100 - 240 VAC to 12 VDC at 1.5 amp.

The optional INTEG Power Supply with the UK plug converts 100 - 240 VAC 50-60 Hz to 12 VDC at 1.5 amp.

The Power 4 Relay Output Expansion Module adds 4 low/high voltage relays (handling up to 120/240 Volts AC @ 10 amps), form C relays (one normally open contact and one normally closed contact) to the JNIOR.

Power 4 Relay Output Expansion Module Brochure      Power 4 Relay Output Expansion Module Data Sheet

The 4 - 20 mA Analog Expansion Module adds 4 analog inputs and 2 analog outputs to the JNIOR. Just plug the expansion module into the JNIOR Sensor Port and reboot. The expansion module will automatically be addressed as inputs 1 - 4 (or 5 - 8 for the second module) and outputs 1 - 2 (or 3 - 4 for the second module).

4-20ma Expansion Module Brochure      4-20mA Expansion Module Data Sheet
 

The 10 VDC Analog Expansion Module adds 4 analog inputs (-10 to +10 VDC) and 2 analog outputs (0 to 10 VDC) to the JNIOR. Just plug the expansion module into the JNIOR Sensor Port and reboot. The expansion module will automatically be addressed as inputs 1 - 4 (or 5 - 8 for the second module) and outputs 1 - 2 (or 3 - 4 for the second module).

10VDC Expansion Module Brochure      10VDC Expansion Module Data Sheet
 

The 3 Channel LED Dimmer Expansion Module System adds 3 channels of PWM (Pulse Width Modulated) control that can regulate LED strip lights from 0 - 100%.  Each channel can handle up to 10 amps.  The module handles up to 30 amps in total.  The expansion module plugs into the JNIOR Sensor Port.  The expansion module will automatically be addressed as outputs 1 - 3 (or 4 - 6 for the second module and so on).

3 Channel LED Dimmer Manual      3 Channel Dimmer Brochure
 

The JNIOR Control Panel works with all the JNIOR models and connects to the JNIOR Sensor Port to provide manual control of JNIOR macros via the switches and convey feedback through the LED status lights. The JNIOR Control Panel is integrated with the JNIOR via the Tasker and Cinema programs. All functionality is easily set-up utilizing the WebUI and the JNIOR Support Tool.

Control Panel Brochure      Control Panel Data Sheet
 

The JNIOR Model 410 is an Ethernet I/O controller and data acquisition device with 8 digital inputs, 8 relay outputs, one Ethernet port, two serial ports and one Sensor port

JNIOR 410 Data Sheet      JNIOR 410 Brochure
 
TUV Certification
 

The JNIOR Model 414 is an Ethernet I/O controller and data acquisition device with 12 digital inputs, 4 relay outputs, one Ethernet port, two serial ports and one Sensor port

JNIOR 414 Data Sheet
 
TUV Certification
 

-Kit includes 12VDC 1A Power Supply (US) and standard screw type connectors
-8 Dry Contact Relay Outputs, 8 Isolated TTL Digital Inputs for Monitoring
-100Mbps Ethernet Port - TLSv1.2 Secure (Web, FTP, Telnet), incl. MODBUS protocols
-2 Standard RS-232 Serial Ports (AUX Port RS-422 and RS-485 capable)
-Expansion Modules Available for Sensors, Power Relays, Analog Signals and Rack Switch Panels.

The JNIOR Model 412 is an Ethernet I/O controller and data acquisition device with 4 digital inputs, 12 relay outputs, one Ethernet port, two serial ports and one Sensor port

JNIOR 412 Data Sheet
 
TUV Certification
 

The JNIOR Model 412DMX is an Ethernet I/O controller and data acquisition device with 4 digital inputs, 12 relay outputs, one Ethernet port, one DMX port, one serial port and one Sensor port

JNIOR 412DMX Data Sheet
 
TUV Certification
 

-Kit includes 12VDC 1A Power Supply (US) and standard screw type connectors
-12 Dry Contact Relay Outputs, 4 Isolated TTL Digital Inputs for Monitoring
-100Mbps Ethernet Port - TLSv1.2 Secure (Web, FTP, Telnet), incl. MODBUS protocols
-1 Isolated DMX512 5-pin Port, 1 Standard RS-232 Serial Port
-Includes Ride-Thru Power Technology (uninterrupted by short <15 second power outages)